This NED is equipped with a number of runtime configuration options "NED settings" allowing for
customization by the end user. All options are configurable using the NSO API for NED settings.
Most NED settings can be configured globally, per device profile or per device instance in the
following locations:
global
/ncs:devices/global-settings/ned-settings/zte-zxros/
profile
/ncs:devices/ncs:profiles/profile:/ned-settings/zte-zxros/
device
/ncs:/device/devices/device:/ned-settings/zte-zxros/
Profiles setting overrides global-settings and device settings override profile settings,
hence the narrowest scope of the setting is used by the device.
If user changes a ned-setting, then user must reconnect to the device, i.e.
disconnect and connect in order for the new setting to take effect.
From the NSO CLI the device instance NED settings for this NED are available under:
# config
# devices device dev-1 ned-settings zte-zxros
Press TAB to see all the NED settings.
- zte-zxros extended-parser <enum> (default auto)
Make the cisco-nx NED handle CLI parsing (i.e. transform the running-config from the device to
the model based config tree).
auto - Uses turbo-mode when available, will use fastest availablemethod to load
data to NSO.
turbo-mode - The NED executes the whole command parsing by itself, completely bypassing
the NSO CLI parser. The configuration dump is transferred to NSO using maapi
setvalues call.
turbo-xml-mode - The NED executes the whole command parsing by itself, completely bypassing
the NSO CLI parser. The configuration dump is transferred to NSO in XML
format.
2. ned-settings zte-zxros proxy
Configure NED to access device via a proxy.
- proxy remote-connection <enum>
Connection type between proxy and device.
ssh - ssh.
telnet - telnet.
serial - serial.
- proxy remote-address <union>
Address of host behind the proxy.
- proxy remote-port <uint16>
Port of host behind the proxy.
- proxy remote-name <string>
User name on the device behind the proxy.
- proxy remote-password <string>
Password on the device behind the proxy.
- proxy proxy-prompt <string>
Prompt pattern on the proxy host before connecting to device.
- proxy remote-ssh-args <string>
Additional arguments used to establish proxy connection.
3. ned-settings zte-zxros proxy-2
Configure NED to access device via a second proxy.
- proxy-2 remote-connection <enum>
Connection type between proxy and device.
ssh - ssh.
telnet - telnet.
serial - serial.
- proxy-2 remote-address <union>
Address of host behind the proxy.
- proxy-2 remote-port <uint16>
Port of host behind the proxy.
- proxy-2 remote-name <string>
User name on the device behind the proxy.
- proxy-2 remote-password <string>
Password on the device behind the proxy.
- proxy-2 proxy-prompt <string>
Prompt pattern on the proxy host before connecting to device.
- proxy-2 remote-ssh-args <string>
Additional arguments used to establish proxy connection.
4. ned-settings zte-zxros connection
Configure settings specific to the connection between NED and device.
- connection ssh client <enum>
Configure the SSH client to use. Relevant only when using the
NED with NSO 5.6 or later.
ganymed - The legacy SSH client. Used on all older versions of NSO.
sshj - The new SSH client with support for the latest crypto features.
This
is the default when using the NED on NSO 5.6 or later.
- connection ssh host-key known-hosts-file <string>
Path to openssh formatted 'known_hosts' file containing valid
host keys.
- connection ssh host-key public-key-file <string>
Path to openssh formatted public (.pub) host key file.
- connection ssh auth-key private-key-file <string>
Path to openssh formatted private key file.
- connection number-of-retries <uint8> (default 0)
Configure max number of retries the NED will try to connect to the device before giving up.
Default 0.
- connection time-between-retry <uint8> (default 1)
Configure the time in seconds the NED will wait between each connect retry. Default 1s.
- connection character-set <string> (default UTF-8)
Character set to use for telnet session.
- connection commands meta-data <WORD>
Change the default connector. Default 'ned-connector.json'.
- connection commands initial-action <union>
Interactor action used to initialize a connection.
- connection commands awaken-console <string>
Command sent to awaken console during connection.
- connection commands send-delay <uint32> (default 0)
Delay in ms before sending a command during connection.
- connection commands expect-timeout <uint32> (default 60000)
Default limit in ms for waiting for command response.
- connection prompts oper <string>
Default (operational) device prompt.
5. ned-settings zte-zxros transaction
Transaction specific settings.
- transaction trans-id-method <enum> (default modeled-config)
Select the method for calculating transaction-id.
modeled-config - Use a snapshot of the data of only the modeled parts of running
config for calculation.
full-config - Use a snapshot of the full running config for calculation.
device-custom - Use a device custom method to get a value to use for trans-id.
6. ned-settings zte-zxros console
Settings used while interacting with a device.
- console ignore-errors <true|false>
Flag indicating if errors should be ignored.
- console ignore-warnings <true|false>
Flag indicating if warnings should be ignored.
- console ignore-retries <true|false>
Flag indicating if retries should be ignored.
- console max-retries <uint16>
Maximum number of retries of a command.
- console retry-delay <uint16>
Number of ms before retrying a command.
- console send-delay <uint32>
Enable delay before sending commands.
- console expect-timeout <uint32>
Set default timeout for sending commands.
- console chunk-size <uint8>
Enable executing commands in chunks.
- console line-feed <string>
Overwrites default line-feed character.
- console obfuscate-secret <true|false>
Secrets will be obfuscated in trace & log files.
- console extension action <name> <init> <flush>
- name <string>
A name for the action.
- init <string>
Command sent to intialize action.
- flush <true|false>
Flush device buffer once action is completed.
6.4.1. ned-settings zte-zxros console extension action state
Extend state machine with answers/questions to handle.
- state <pattern> <method> <argument> <next>
- pattern <string>
Regular expression indicating action required.
- method <enum>
Method used to take action.
reportInfo - reportInfo.
reportError - reportError.
reportWarning - reportWarning.
sendCommand - sendCommand.
sendSecret - sendSecret.
sendRetry - sendRetry.
recoverError - recoverError.
- argument <string>
Additional info to method.
- next <string> (default DONE)
State once action is taken.
7. ned-settings zte-zxros logger
Settings for controlling logs generated.
- logger level <enum> (default info)
Set level of logging.
error - error.
info - info.
verbose - verbose.
debug - debug.
- logger java <true|false> (default true)
Toggle logs to be added to ncs-java-vm.log.
8. ned-settings zte-zxros developer
Contains settings used for debugging (intended for NED developers).
- developer trace-enable <true|false> (default false)
Enable developer tracing. WARNING: may choke NSO with large commits|systems.
- developer trace-connection <true|false> (default false)
Enable connection tracing. WARNING: may choke NSO with IPC messages.
- developer trace-timestamp <true|false> (default false)
Add timestamp from NED instance in trace messages for debug purpose.
- developer progress-verbosity <enum> (default debug)
Maximum NED verbosity level which will get written in devel.log
file
disabled - disabled.
normal - normal.
verbose - verbose.
very-verbose - very-verbose.
debug - debug.
- developer platform model <string>
Override device model name/number.
- developer platform name <string>
Override device name.
- developer platform version <string>
Override device version.
