README-ned-settings
NED settings details
This NED is equipped with a number of runtime configuration options "NED settings" allowing for customization by the end user. All options are configurable using the NSO API for NED settings. Most NED settings can be configured globally, per device profile or per device instance in the following locations:
global /ncs:devices/global-settings/ned-settings/etsi-sol003/ profile /ncs:devices/ncs:profiles/profile:/ned-settings/etsi-sol003/ device /ncs:/device/devices/device:/ned-settings/etsi-sol003/
Profiles setting overrides global-settings and device settings override profile settings, hence the narrowest scope of the setting is used by the device.
If user changes a ned-setting, then user must reconnect to the device, i.e. disconnect and connect in order for the new setting to take effect.
From the NSO CLI the device instance NED settings for this NED are available under:
# config
# devices device dev-1 ned-settings etsi-sol003
Press TAB to see all the NED settings.
Table of contents
1. ned-settings etsi-sol003
2. connection
2.1. model
3. logger
4. device
5. flow
6. developer1. ned-settings etsi-sol003
- etsi-sol003 edit-timeout <uint32> (default 720)
Configure the additional timeout in seconds for EDIT operations (0 - no additional EDIT
timeout). Default 720s (12 minutes).2. ned-settings etsi-sol003 connection
Configure settings specific to the connection between NED and device.
- connection number-of-retries <uint8> (default 0)
Configure max number of retries the NED will try to connect to the device before giving up.
Default 0.
- connection time-between-retry <uint8> (default 1)
Configure the time in seconds the NED will wait between each connect retry. Default 1s.
- connection live-check status <true|false> (default true)
Check that real device is up/alive on connect.
- connection live-check api-resource <enum> (default vnf-subscriptions)
API Resource to check the connection with. Use an API Resource
that has reachable and responsive GET endpoint.
vnf-instances - vnf-instances.
vnf-subscriptions - vnf-subscriptions.
- connection ssl accept-any <true|false> (default false)
Accept any SSL certificate presented by the device. Warning!
This enables Man in the Middle attacks and should only be used
for testing and troubleshooting.
- connection ssl certificate <binary>
SSL certificate stored in DER format but since it is entered
as Base64 it is very similar to PEM but without banners like "-----
BEGIN CERTIFICATE -----". Default uses the default trusted certificates
installed in Java JVM. An easy way to get the PEM of a server:
openssl s_client -connect HOST:PORT
- connection api-base-url <string>
API base URL for device REST API.
- connection api-key <string>
API authentication key if needed.
- connection api request method patch content-type <string> (default application/merge-patch+json)
- connection api auth credentials username <string>
API username for BASIC auth.
- connection api auth credentials password <string>
API password for BASIC auth.
- connection api auth type <enum> (default oauth2)
API auth type.
basic - basic.
oauth2 - oauth2.
- connection api param tenant-id <string>
Configure {tenantId}.
- connection api address default <string>
API default host.
- connection api address identity <string>
API host for device Identity.
- connection api address token <string>
API host for device Token.
- connection api address vnf-instance <string>
API host for device VNF Instance.
- connection api address ns-instance <string>
API host for device NS Instance.
- connection api address runtime-catalog <string>
API host for device Runtime Catalog.
- connection api address vim-inventory <string>
API host for device VIM Inventory.
- connection api address api-gateway <string>
API host for device API Gateway.
- connection api address api-gateway-openshift <string>
API host for device API Gateway Openshift.
- connection api base-url default <string>
API default base URL.
- connection api base-url identity <string>
API base URL for device Identity.
- connection api base-url token <string> (default /auth/v1)
API base URL for device Token.
- connection api base-url vnf-instance <string> (default /vnflcm/v1)
API base URL for device VNF Instance.
- connection api base-url vnf-instance-ext-operation <string> (default /or_vnfm/vnflcm/v1)
API base URL for device VNF Instance Operation/Migrate Extension.
- connection api base-url vnf-fault-management <string> (default /vnffm/v1)
API base URL for device VNF Fault Management.
- connection api base-url vnf-performance-management <string> (default /vnfpm/v1)
API base URL for device VNF Performance Management.
- connection api base-url vnf-indicator <string> (default /vnfind/v1)
API base URL for device VNF Indicator.
- connection api base-url ns-instance <string> (default /nslcm/v1)
API base URL for device NS Instance.
- connection api base-url vnf-package <string> (default /vnfpkgm/v1)
API base URL for device VNF Package.
- connection api base-url runtime-catalog <string> (default /v1)
API base URL for device Runtime Catalog.
- connection api base-url vim-inventory <string> (default )
API base URL for device VIM Inventory.
- connection api base-url api-gateway <string> (default )
API base URL for device API Gateway.
- connection api base-url api-gateway-openshift <string> (default )
API base URL for device API Gateway Openshift.
- connection api base-url rpc-action default-vnf-extension base-url <string> (default )
- connection api endpoint get vim-tenants <string> (default /resource-service/vims/:id/tenantsInfo)
- connection api endpoint get vnf-instance-vnfc <string> (default /inventory-gateway/topology-inventory/v1/inventory/nodes/:id)
- connection api endpoint get gateway-vnf-instance <string> (default /vnf-manager/vnflcm/v1/vnf_instances/:id)
- connection api endpoint get vnf-instance-resource <string> (default /api-gateway/vnf/inventory/resources/:id)
- connection api endpoint get tenant-vnf-instance-vnfc <string> (default /inventory-gateway/topology-inventory/:tenant-id/v1/inventory/nodes/:id)
- connection api endpoint get tenant-gateway-vnf-instance <string> (default /vnf-manager/:tenant-id/vnflcm/v1/vnf_instances/:id)
- connection api sync only <enum>
vnf-instance - vnf-instance.
ns-instance - ns-instance.
vnf-package - vnf-package.
ns-package - ns-package.
vnf-op - vnf-op.
ns-op - ns-op.
vnf-subscription - vnf-subscription.
ns-subscription - ns-subscription.
vnf-fm-alarm - vnf-fm-alarm.
vnf-fm-subscription - vnf-fm-subscription.
vnf-pm-subscription - vnf-pm-subscription.
vnf-pm-job - vnf-pm-job.
vnf-pm-threshold - vnf-pm-threshold.
vnf-indicator - vnf-indicator.
vnf-ind-subscription - vnf-ind-subscription.
vim - vim.
- connection api sync filter api-actions <enum>
Default: [ GET ].
GET - GET.
CREATE - CREATE.
UPDATE - UPDATE.
DELETE - DELETE.
- connection api sync filter ned-actions <enum>
Default: [ CONFIG ].
CONFIG - CONFIG.
RPC-ACTION - RPC-ACTION.
- connection api proto default <string>
API default proto.
- connection api proto runtime-catalog <string>
API proto for device Runtime Catalog.
- connection api number-of-retries <uint8> (default 0)
Configure max number of retries the NED will try to connect to the device before giving up.
Default 0.
- connection api time-between-retry <uint8> (default 1)
Configure the time in seconds the NED will wait between each connect retry. Default 1s.
- connection api key <string>
API authentication key if needed.
- connection api token credentials username <string>
API username used for PASSWORD grant type.
- connection api token credentials password <string>
API password used for PASSWORD grant type.
- connection api token grant-type <enum> (default client_credentials)
API token grant type.
client_credentials - client_credentials.
password - password.
- connection api token auth-type <enum> (default basic)
API token auth type.
basic - basic.
oauth2 - oauth2.
- connection api token auth-request-template <enum> (default default)
API token auth request template.
default - default.
x-header - x-header.
- connection api token auth-request-x-header-params username-param <string> (default X-login)
- connection api token auth-request-x-header-params password-param <string> (default X-password)
- connection api token auth-request-x-header-params token-header-key <string> (default cookie)
- connection api token auth-request-x-header-params token-header-value <string> (default JSESSIONID=%s)
- connection api token cache <true|false> (default true)
Disable/Enable API token caching.
- connection api token use-refresh-token <true|false> (default true)
Disable/Enable refresh_token usage.2.1. ned-settings etsi-sol003 connection api sync model
- connection api sync model <name> <is-syncable> <sync-disabled> <sync-gracefully> <excluded> <no-addons> <sync-vnfc>
- name <enum>
vnf-instance - vnf-instance.
ns-instance - ns-instance.
vnf-package - vnf-package.
ns-package - ns-package.
vnf-op - vnf-op.
ns-op - ns-op.
vnf-subscription - vnf-subscription.
ns-subscription - ns-subscription.
vnf-fm-alarm - vnf-fm-alarm.
vnf-fm-subscription - vnf-fm-subscription.
vnf-pm-subscription - vnf-pm-subscription.
vnf-pm-job - vnf-pm-job.
vnf-pm-threshold - vnf-pm-threshold.
vnf-indicator - vnf-indicator.
vnf-ind-subscription - vnf-ind-subscription.
vim - vim.
- is-syncable <true|false> (default false)
- sync-disabled <true|false> (default false)
Sync DISABLED entities.
- sync-gracefully <true|false> (default false)
Ignore faulty API addons during sync (sync only valid ones).
- excluded <string>
Excluded IDs during the sync.
- no-addons <string>
IDs synced without API addons (just raw data from main API resource).
- sync-vnfc <true|false> (default true)
Retrieve vnf-instance vnfc node.
- actions no-delete <true|false> (default false)
Disable API DELETE action.3. ned-settings etsi-sol003 logger
Settings for controlling logs generated.
- logger level <enum> (default info)
Set level of logging.
error - error.
info - info.
verbose - verbose.
debug - debug.
- logger java <true|false> (default true)
Toggle logs to be added to ncs-java-vm.log.4. ned-settings etsi-sol003 device
- device model <enum> (default default-sol3)
default-sol3 - default-sol3.
netcracker - netcracker.
esc - esc.
cbam - cbam.5. ned-settings etsi-sol003 flow
- flow vnf-instance instantiate auto <true|false> (default false)
Enable/Disable Instance instantiation after creation.
- flow vnf-instance terminate auto <true|false> (default false)
Enable/Disable Instance termination before deletion.
- flow ns-instance instantiate auto <true|false> (default true)
Enable/Disable Instance instantiation after creation.
- flow ns-instance terminate auto <true|false> (default true)
Enable/Disable Instance termination before deletion.
- flow subscription trace <true|false> (default false)
Enable/Disable Subscription request tracing.
- flow subscription auth fallback <true|false> (default false)
Enable/Disable Subscription Authentication fallback to default
device username/password6. ned-settings etsi-sol003 developer
Contains settings used for debugging (intended for NED developers).
- developer trace-enable <true|false> (default false)
Enable developer tracing. WARNING: may choke NSO with large commits|systems.
- developer trace-connection <true|false> (default false)
Enable connection tracing. WARNING: may choke NSO with IPC messages.
- developer trace-timestamp <true|false> (default false)
Add timestamp from NED instance in trace messages for debug purpose.
- developer progress-verbosity <enum> (default disabled)
Maximum NED verbosity level which will get written in devel.log
file
disabled - disabled.
normal - normal.
verbose - verbose.
very-verbose - very-verbose.
debug - debug.
- developer platform model <string>
Override device model name/number.
- developer platform name <string>
Override device name.
- developer platform version <string>
Override device version.Last updated
Was this helpful?