Manage devices and device groups in your NSO deployment.
The Devices view provides options to manage devices and device groups in the NSO network.
The Device management view lists the devices in the network and provides options to manage them.
You can search for a device by its name, IP address, or other parameters. Narrow down the results by using the Select device group filter.
To add a new device to NSO:
Click Add device.
In the Add device pop-up, specify the device name.
Click Add.
Configure the specifics of the device in the Configuration editor.
Review and commit the changes in the Commit manager when done.
Actions can be applied on a device from the Device management view or the Configuration editor -> Actions tab.
An action can be applied to a single or multiple devices at once.
Select the device(s) from the list.
Using the Choose actions button, select the desired action. The result of the action is returned momentarily.
Actions Possible in the Device Management View
Available actions include Connect, Ping, Sync from, Sync to, Check sync, Compare config, Fetch ssh host keys, Apply template, Modify in Config editor, and Delete.
See Lifecycle Operations for the details of these actions.
Additional actions are applied per individual device. Use this option if you want to run an action with additional parameters.
Click the device name in the list.
Access the Actions tab in the Configuration editor.
Click the desired action in the list.
At this point, you can configure different parameters.
(To reset all the parameters to their default value, use the Reset action parameters option).
Run the action.
Actions Possible in the Configuration Editor -> Actions Tab
If you access the device in the Configuration editor, the following additional actions are available: migrate, copy-capabilities, find-capabilities, add-capability, instantiate-from-other-device, check-yang-modules, disconnect, delete-config, scp-to scp-from, load-native-config.
See Lifecycle Operations for the details of these actions.
To edit the device configuration of an existing device:
In the Devices view, click the desired device from the list.
In the Configuration editor, click the Edit config tab.
Make the desired changes.
(Press Enter to save the changes. An uncommitted change in a field's value is marked by a green color, and is referred to as a 'dirty state').
Review and commit the change in the Commit manager.
The other two tabs, i.e., Config and Operdata can be respectively used to:
View the device configuration, and,
View the device's operational data.
The Device groups view lists all the available groups and devices belonging to them. You can add new device groups in this view as well as carry out actions on devices belonging to a group.
Device groups allow for the grouping and collective management of devices.
Click Add device group.
In the Create device group pop-up, specify the group name.
If you want to place the new device group under a parent group, select the Place under parent device group option and specify the parent group.
Click Create. You will be redirected to the group's details page. Here, the following panes are available:
Details: Displays basic details of the group, i.e., its name and parent/subgroup information. To link a sub-group, use the Connect sub device group option.
Devices in this group: Displays currently added devices in the group and provides the option to remove them from the group.
Add devices: Displays all available NSO devices and provides the option to add them to the group.
In the Add devices pane, select the device(s) that you want to add to the new group and click Add devices to group. The added devices become visible under the Devices in this group pane.
Finally, click Save.
Click the desired device group to access the group's detail page.
In the Devices in this group pane, select the device(s) to be removed from the group.
Click Remove from device group. The devices are removed immediately (without a Commit Manager review).
Click Save.
Device group actions let you perform an action on all the devices belonging to a group.
Select the desired device group from the list. It is possible to select multiple groups at once.
Choose the desired action from the Choose actions button.
Actions Possible in the Device Groups View
The available group actions are the same as in the section called Apply an Action on a Device (e.g., Connect, Sync from, Sync to, etc.) and are described in Lifecycle Operations.
In the Device management view, you can also apply actions on a device using the more options button.
The Modify in Config Editor and Delete actions are accessible by clicking the more options button on the device row.
To fetch information about an action in the Configuration editor -> Actions tab, click the info icon.
In the Device groups view, you can also apply actions on a device group using the more options button.
The Modify in Config editor option is accessible by clicking the more options button on a device group.
