Containerized NSO

NSO can be deployed in your environment using a container, such as Docker. Cisco offers two pre-built images for this purpose that you can use to run NSO and build packages (see Overview of NSO Images).

Migration Information

If you are migrating from an existing NSO System Install to a container-based setup, follow the guidelines given below in Migration to Containerized NSO.

Use Cases for Containerized Approach

Running NSO in a container offers several benefits that you would generally expect from a containerized approach, such as ease of use and convenient distribution. More specifically, a containerized NSO approach allows you to:

• Run a container image of a specific version of NSO and your packages which can then be distributed as one unit.

• Deploy and distribute the same version across your production environment.

• Use the Build Image containing the necessary environment for compiling NSO packages.

Overview of NSO Images

Cisco provides the following two NSO images based on Red Hat UBI.

• Production Image

• Build Image

Production Image

The Production Image is a production-ready NSO image for system-wide deployment and use. It is a pre-built Red Hat UBI-based NSO image created on System Install and available from the Cisco Software Download site.

Use the pre-built image as the base image in the container file (e.g., Dockerfile) and mount your own packages (such as NEDs and service packages) to run a final image for your production environment (see examples below).

Build Image

The Build Image is a separate standalone NSO image with the necessary environment and software for building packages. It is also a pre-built Red Hat UBI-based image provided specifically to address the developer needs of building packages.

The image is available as a signed package (e.g., nso-VERSION.container-image-build.linux.ARCH.signed.bin) from the Cisco Software Download site. You can run the Build Image in different ways, and a simple tool for defining and running multi-container Docker applications is Docker Compose (see examples below).

The container provides the necessary environment to build custom packages. The Build Image adds a few Linux packages that are useful for development, such as Ant, JDK, net-tools, pip, etc. Additional Linux packages can be added using, for example, the dnf command. The dnf list installed command lists all the installed packages.

Downloading and Extracting the Images

To fetch and extract NSO images:

1. On Cisco's official Software Download site, search for "Network Services Orchestrator". Select the relevant NSO version in the drop-down list, e.g., "Crosswork Network Services Orchestrator 6", and click "Network Services Orchestrator Software". Locate the binary, which is delivered as a signed package (e.g., nso-6.1.container-image-prod.linux.x86_64.signed.bin).

2. Extract the image and other files from the signed package, for example:

   Copy

   sh nso-6.1.container-image-prod.linux.x86_64.signed.bin

System Requirements

To run the images, make sure that your system meets the following requirements:

• A system running Linux x86_64 or ARM64, or macOS x86_64 or Apple Silicon. Linux for production.

• A container platform, such as Docker. Docker is the recommended platform and is used as an example in this guide for running NSO images. You may, however, use another container runtime of your choice. Note, however, that commands in this guide are Docker-specific. if you use another container runtime, make sure to use the respective commands.

Administrative Information

This section covers the necessary administrative information about the NSO Production Image.

Migrate to Containerized NSO Setup

If you have NSO installed for production use using System Install, you can migrate to the Containerized NSO setup by following the instructions in this section. Migrating your Network Services Orchestrator (NSO) to a containerized setup can provide numerous benefits, including improved scalability, easier version management, and enhanced isolation of services.

The migration process is designed to ensure a smooth transition from a System-Installed NSO to a container-based deployment. Detailed steps guide you through preparing your existing environment, exporting the necessary configurations and state data, and importing them into your new containerized NSO instance. During the migration, consider the container runtime you plan to use, as this impacts the migration process.

Before You Start

• We recommend reading through this guide to understand better the expectations, requirements, and functioning aspects of a containerized deployment.

• Verify the compatibility of your current system configurations with the containerized NSO setup. See System Requirements for more information.

• Determine and install the container orchestration tool you plan to use (e.g., Docker, etc.).

• Ensure that your current NSO installation is fully operational and backed up and that you have a clear rollback strategy in case any issues arise. Pay special attention to customizations and integrations that your current NSO setup might have, and verify their compatibility with the containerized version of NSO.

• Have a contingency plan in place for quick recovery in case any issues are encountered during migration.

Migration Steps

Prepare:

1. Document your current NSO environment's specifics, including custom configurations and packages.

2. Perform a complete backup of your existing NSO instance, including configurations, packages, and data.

3. Set up the container environment and download/extract the NSO production image. See Downloading and Extracting the Images for details.

Migrate:

1. Stop the current NSO instance.

2. Save the run directory from the NSO instance in an appropriate place.

3. Use the same ncs.conf and High Availability (HA) setup previously used with your System Install. We assume that the ncs.conf follows the best practice and uses the NCS_DIR, NCS_RUN_DIR, NCS_CONFIG_DIR, and NCS_LOG_DIR variables for all paths. The ncs.conf can be added to a volume and mounted to /nso/etc in the container.

   Copy

   docker container create --name temp -v NSO-evol:/nso/etc hello-world
   docker cp ncs.conf temp:/nso/etc
   docker rm temp

4. Add the run directory as a volume, mounted to /nso/run in the container and copy the CDB data, packages, etc., from the previous System Install instance.

   Copy

   cd path-to-previous-run-dir
   docker container create --name temp -v NSO-rvol:/nso/run hello-world
   docker cp . temp:/nso/run
   docker rm temp

5. Create a volume for the log directory.

   Copy

   docker volume create --name NSO-lvol

6. Start the container. Example:

   Copy

   docker run -v NSO-rvol:/nso/run -v NSO-evol:/nso/etc -v NSO-lvol:/log -itd \
   --name cisco-nso -e EXTRA_ARGS=--with-package-reload -e ADMIN_USERNAME=admin \
   -e ADMIN_PASSWORD=admin cisco-nso-prod:6.1

Finalize:

1. Ensure that the containerized NSO instance functions as expected and validate system operations.

2. Plan and execute your cutover transition from the System-Installed NSO to the containerized version with minimal disruption.

3. Monitor the new setup thoroughly to ensure stability and performance.

ncs.conf File Configuration and Preference

The run-nso.sh script runs a check at startup to determine which ncs.conf file to use. The order of preference is as below:

1. The ncs.conf file specified in the Dockerfile (i.e., ENV $NCS_CONFIG_DIR /etc/ncs/) is used as the first preference.

2. The second preference is to use the ncs.conf file mounted in the /nso/etc/ run directory.

3. If no ncs.conf file is found at either /etc/ncs or /nso/etc, the default ncs.conf file provided with the NSO image in /defaults is used.

Pre- and Post-Start Scripts

If you need to perform operations before or after the ncs process is started in the Production container, you can use Python and/or Bash scripts to achieve this. Add the scripts to the $NCS_CONFIG_DIR/pre-ncs-start.d/ and $NCS_CONFIG_DIR/post-ncs-start.d/ directories to have the run-nso.sh script run them.

Admin User Creation

An admin user can be created on startup by the run script in the container. Three environment variables control the addition of an admin user:

• ADMIN_USERNAME: Username of the admin user to add, default is admin.

• ADMIN_PASSWORD: Password of the admin user to add.

• ADMIN_SSHKEY: Private SSH key of the admin user to add.

As ADMIN_USERNAME already has a default value, only ADMIN_PASSWORD, or ADMIN_SSHKEY need to be set in order to create an admin user. For example:

docker run -itd --name cisco-nso -e ADMIN_PASSWORD=admin cisco-nso-prod:6.1

This can be useful when starting up a container in CI for testing or development purposes. It is typically not required in a production environment where there is a permanent CDB that already contains the required user accounts.

Exposing Ports

The default ncs.conf NSO configuration file does not enable any northbound interfaces, and no ports are exposed externally to the container. Ports can be exposed externally of the container when starting the container with the northbound interfaces and their ports correspondingly enabled in ncs.conf.

Backup and Restore

The backup behavior of running NSO in vs. outside the container is largely the same, except that when running NSO in a container, the SSH and SSL certificates are not included in the backup produced by the ncs-backup script. This is different from running NSO outside a container where the default configuration path /etc/ncs is used to store the SSH and SSL certificates, i.e., /etc/ncs/ssh for SSH and /etc/ncs/ssl for SSL.

Take a Backup

Let's assume we start a production image container using:

docker run -d --name cisco-nso -v NSO-vol:/nso -v NSO-log-vol:/log cisco-nso-prod:6.1

To take a backup:

• Run the ncs-backup command. The backup file is written to /nso/run/backups.

  Copy

  docker exec -it cisco-nso ncs-backup
  INFO  Backup /nso/run/backups/ncs-6.1@2024-11-03T11:31:07.backup.gz created successfully

Restore a Backup

To restore a backup, NSO must not be running. As you likely only have access to the ncs-backup tool, the volume containing CDB, and other run-time data from inside of the NSO container, this poses a slight challenge. Additionally, shutting down NSO will terminate the NSO container.

To restore a backup:

1. Shut down the NSO container:

   Copy

   docker stop cisco-nso
   docker rm cisco-nso

2. Run the ncs-backup --restore command. Start a new container with the same persistent shared volumes mounted but with a different command. Instead of running the /run-nso.sh, which is the normal command of the NSO container, run the restore command.

   Copy

   docker run -it --rm --volumes-from cisco-nso -v NSO-vol:/nso -v NSO-log-vol:/log \
   --entrypoint ncs-backup cisco-nso-prod:6.1 \
   --restore /nso/run/backups/ncs-6.1@2024-11-03T11:31:07.backup.gz
   
   Restore /etc/ncs from the backup (y/n)? y
   Restore /nso/run from the backup (y/n)? y
   INFO  Restore completed successfully

3. Restoring an NSO backup should move the current run directory (/nso/run to /nso/run.old) and restore the run directory from the backup to the main run directory (/nso/run). After this is done, start the regular NSO container again as usual.\

   Copy

   docker run -d --name cisco-nso -v NSO-vol:/nso -v NSO-log-vol:/log cisco-nso-prod:6.1

SSH Host Key

The NSO image /run-nso.sh script looks for an SSH host key named ssh_host_ed25519_key in the /nso/etc/ssh directory to be used by the NSO built-in SSH server for the CLI and NETCONF interfaces.

If an SSH host key exists, which is for a typical production setup stored in a persistent shared volume, it remains the same after restarts or upgrades of NSO. If no SSH host key exists, the script generates a private and public key.

In a high-availability (HA) setup, the host key is typically shared by all NSO nodes in the HA group and stored in a persistent shared volume. I.e., each NSO node does not generate its host key to avoid fetching the public host key after each failover from the new primary to access the primary's NSO CLI and NETCONF interfaces.

HTTPS TLS Certificate

NSO expects to find a TLS certificate and key at /nso/ssl/cert/host.cert and /nso/ssl/cert/host.key respectively. Since the /nso path is usually on persistent shared volume for production setups, the certificate remains the same across restarts or upgrades.

If no certificate is present, one will be generated. It is a self-signed certificate valid for 30 days making it possible to use both in development and staging environments. It is not meant for the production environment. You should replace it with a properly signed certificate for production and it is encouraged to do so even for test and staging environments. Simply generate one and place it at the provided path, for example using the following, which is the command used to generate the temporary self-signed certificate:

openssl req -new -newkey rsa:4096 -x509 -sha256 -days 30 -nodes \
-out /nso/ssl/cert/host.cert -keyout /nso/ssl/cert/host.key \
-subj "/C=SE/ST=NA/L=/O=NSO/OU=WebUI/CN=Mr. Self-Signed"

YANG Model Changes (destructive)

The database in NSO, called CDB, uses YANG models as the schema for the database. It is only possible to store data in CDB according to the YANG models that define the schema.

If the YANG models are changed, particularly if the nodes are removed or renamed (rename is the removal of one leaf and an addition of another), any data in CDB for those leaves will also be removed. NSO normally warns about this when you attempt to load new packages, for example, request packages reload command refuses to reload the packages if the nodes in the YANG model have disappeared. You would then have to add the force argument, e.g., request packages reload force.

Health Check

The base Production Image comes with a basic container health check. It uses ncs_cmd to get the state that NCS is currently in. Only the result status is observed to check if ncs_cmd was able to communicate with the ncs process. The result indicates if the ncs process is responding to IPC requests.

NSO System Dump and Disable Memory Overcommit

By default, the Linux kernel allows overcommit of memory. However, memory overcommit produces an unexpected and unreliable environment for NSO since the Linux Out Of Memory Killer, or OOM-killer, may terminate NSO without restarting it if the system is critically low on memory.

Also, when the OOM-killer terminates NSO, NSO will not produce a system dump file, and the debug information will be lost. Thus, it is strongly recommended that overcommit is disabled with Linux NSO production container hosts with an overcommit ratio of less than 100% (max).

See Step - 4. Run the Installer in System Install for information on memory overcommit recommendations for a Linux system hosting NSO production containers.

Startup Arguments

The /nso-run.sh script that starts NSO is executed as an ENTRYPOINT instruction and the CMD instruction can be used to provide arguments to the entrypoint-script. Another alternative is to use the EXTRA_ARGS variable to provide arguments. The /nso-run.sh script will first check the EXTRA_ARGS variable before the CMD instruction.

An example using docker run with the CMD instruction:

docker run --name nso -itd cisco-nso-prod:6.1 --with-package-reload \
--ignore-initial-validation

With the EXTRA_ARGS variable:

docker run --name nso \
-e EXTRA_ARGS='--with-package-reload --ignore-initial-validation' \
-itd cisco-nso-prod:6.1

An example using a Docker Compose file, compose.yaml, with the CMD instruction:

services:
    nso:
        image: cisco-nso-prod:6.1
        container_name: nso
        command:
            - --with-package-reload
            - --ignore-initial-validation

With the EXTRA_ARGS variable:

services:
    nso:
        image: cisco-nso-prod:6.1
        container_name: nso
        environment:
            - EXTRA_ARGS=--with-package-reload --ignore-initial-validation

Examples

This section provides examples to exhibit the use of NSO images.

Running the Production Image using Docker CLI

This example shows how to run the standalone NSO Production Image using the Docker CLI.

The instructions and CLI examples used in this example are Docker-specific. If you are using a non-Docker container runtime, you will need to: fetch the NSO image from the Cisco software download site, then load and run the image with packages and networking, and finally log in to NSO CLI to run commands.

If you intend to run multiple images (i.e., both Production and Build), Docker Compose is a tool that simplifies defining and running multi-container Docker applications. See the example (Running the NSO Images using Docker Compose) below for detailed instructions.

Steps

Follow the steps below to run the Production Image using Docker CLI:

1. Start your container engine.

2. Next, load the image and run it. Navigate to the directory where you extracted the base image and load it. This will restore the image and its tag:

docker load -i nso-6.1.container-image-prod.linux.x86_64.tar.gz

1. Start a container from the image. Supply additional arguments to mount the packages and ncs.conf as separate volumes (-v flag), and publish ports for networking (-p flag) as needed. The container starts NSO using the /run-nso.sh script. To understand how the ncs.conf file is used, see ncs.conf File Configuration and Preference.

docker run -itd --name cisco-nso \
-v NSO-vol:/nso \
-v NSO-log-vol:/log \
--net=host \
-e ADMIN_USERNAME=admin\
-e ADMIN_PASSWORD=admin\
cisco-nso-prod:6.1

docker run -itd --name cisco-nso \
-p 8888:8888 \
-e ADMIN_USERNAME=admin\
-e ADMIN_PASSWORD=admin\
cisco-nso-prod

docker run -itd --name cisco-nso \
-v NSO-vol:/nso \
-p 8888:8888 \
-e ADMIN_USERNAME=admin\
-e ADMIN_PASSWORD=admin\
cisco-nso-prod

docker run -itd --name cisco-nso \
-v NSO-vol:/nso \
-v NSO-log-vol:/log \
-p 8888:8888 \
-e ADMIN_USERNAME=admin\
-e ADMIN_PASSWORD=admin\
cisco-nso-prod

1. Finally, log in to NSO CLI to run commands. Open an interactive shell on the running container and access the NSO CLI.

docker exec -it cisco-nso bash
#  ncs_cli -u admin
admin@ncs>

You can also use the docker exec -it cisco-nso ncs_cli -u admin command to access the CLI from the host's terminal.

Upgrading NSO using Docker CLI

This example describes how to upgrade your NSO to run a newer NSO version in the container. The overall upgrade process is outlined in the steps below. In the example below, NSO is to be upgraded from version 6.0 to 6.1.

To upgrade your NSO version:

1. Start a container with the docker run command. In the example below, it mounts the /nso directory in the container to the NSO-vol named volume to persist the data. Another option is using a bind mount of the directory on the host machine. At this point, the /cdb directory is empty.

   Copy

   docker run -itd -—name cisco-nso -v NSO-vol:/nso cisco-nso-prod:6.0

2. Perform a backup, either by running the docker exec command (make sure that the backup is placed somewhere we have mounted) or by creating a tarball of /data/nso on the host machine.

   Copy

   docker exec -it cisco-nso ncs-backup

3. Stop the NSO by issuing the following command, or by stopping the container itself which will run the ncs stop command automatically.

   Copy

   docker exec -it cisco-nso ncs --stop 

4. Remove the old NSO.

   Copy

   docker rm -f cisco-nso

5. Start a new container and mount the /nso directory in the container to the NSO-vol named volume. This time the /cdb folder is not empty, so instead of starting a fresh NSO, an upgrade will be performed.

   Copy

   docker run -itd --name cisco-nso -v NSO-vol:/nso cisco-nso-prod:6.1

At this point, you only have one container that is running the desired version 6.1 and you do not need to uninstall the old NSO.

Running the NSO Images using Docker Compose

This example covers the necessary information to manifest the use of NSO images to compile packages and run NSO. Using Docker Compose is not a requirement, but a simple tool for defining and running a multi-container setup where you want to run both the Production and Build images in an efficient manner.

Packages

The packages used in this example are taken from the examples.ncs/development-guide/nano-services/netsim-sshkey example:

• distkey: A simple Python + template service package that automates the setup of SSH public key authentication between netsim (ConfD) devices and NSO using a nano service.

• ne: A NETCONF NED package representing a netsim network element that implements a configuration subscriber Python application that adds or removes the configured public key, which the netsim (ConfD) network element checks when authenticating public key authentication clients.

docker-compose.yaml - Docker Compose File Example

A basic Docker Compose file is shown in the example below. It describes the containers running on a machine:

• The Production container runs NSO.

• The Build container builds the NSO packages.

• A third example container runs the netsim device.

Note that the packages use a shared volume in this simple example setup. In a more complex production environment, you may want to consider a dedicated redundant volume for your packages.

                version: '1.0'
                volumes:
                  NSO-1-rvol:

                networks:
                  NSO-1-net:

                services:
                  NSO-1:
                    image: cisco-nso-prod:6.1
                    container_name: nso1
                    profiles:
                      - prod
                    environment:
                      - EXTRA_ARGS=--with-package-reload
                      - ADMIN_USERNAME=admin
                      - ADMIN_PASSWORD=admin
                    networks:
                      - NSO-1-net
                    ports:
                      - "2024:2024"
                      - "8888:8888"
                    volumes:
                      - type: bind
                        source: /path/to/packages/NSO-1
                        target: /nso/run/packages
                      - type: bind
                        source: /path/to/log/NSO-1
                        target: /log
                      - type: volume
                        source: NSO-1-rvol
                        target: /nso
                    healthcheck:
                      test: ncs_cmd -c "wait-start 2"
                      interval: 5s
                      retries: 5
                      start_period: 10s
                      timeout: 10s

                  BUILD-NSO-PKGS:
                    image: cisco-nso-build:6.1
                    container_name: build-nso-pkgs
                    network_mode: none
                    profiles:
                      - build
                    volumes:
                      - type: bind
                        source: /path/to/packages/NSO-1
                        target: /nso/run/packages

                  EXAMPLE:
                    image: cisco-nso-prod:6.1
                    container_name: ex-netsim
                    profiles:
                      - example
                    networks:
                      - NSO-1-net
                    healthcheck:
                      test: test -f /nso-run-prod/etc/ncs.conf && ncs-netsim --dir /netsim is-alive ex0
                      interval: 5s
                      retries: 5
                      start_period: 10s
                      timeout: 10s
                      entrypoint: bash
                    command: -c 'rm -rf /netsim
                        && mkdir /netsim
                        && ncs-netsim --dir /netsim create-network /network-element 1 ex
                        && PYTHONPATH=/opt/ncs/current/src/ncs/pyapi ncs-netsim --dir
                            /netsim start
                        && mkdir -p /nso-run-prod/run/cdb
                        && echo "<devices xmlns=\"http://tail-f.com/ns/ncs\">
                            <authgroups><group><name>default</name>
                            <umap><local-user>admin</local-user>
                            <remote-name>admin</remote-name><remote-password>
                            admin</remote-password></umap></group>
                            </authgroups></devices>"
                            > /nso-run-prod/run/cdb/init1.xml
                        && ncs-netsim --dir /netsim ncs-xml-init >
                            /nso-run-prod/run/cdb/init2.xml
                        && sed -i.orig -e "s|127.0.0.1|ex-netsim|"
                            /nso-run-prod/run/cdb/init2.xml
                        && mkdir -p /nso-run-prod/etc
                        && sed -i.orig -e "s|</cli>|<style>c</style>
                            </cli>|" -e "/<ssh>/{n;s|<enabled>false
                                </enabled>|
                                <enabled>true</enabled>|}" defaults/ncs.conf
                        && sed -i.bak -e "/<local-authentication>/{n;s|
                            <enabled>false</enabled>|<enabled>true
                            </enabled>|}" defaults/ncs.conf
                        && sed "/<ssl>/{n;s|<enabled>false</enabled>|
                            <enabled>true</enabled>|}" defaults/ncs.conf
                            > /nso-run-prod/etc/ncs.conf
                        && mv defaults/ncs.conf.orig defaults/ncs.conf
                        && tail -f /dev/null'
                    volumes:
                      - type: bind
                        source: /path/to/packages/NSO-1/ne
                        target: /network-element
                      - type: volume
                        source: NSO-1-rvol
                        target: /nso-run-prod

Steps

Follow the steps below to run the images using Docker Compose:

1. Start the Build container. This starts the services in the Compose file with the profile build.

   Copy

   docker compose --profile build up -d

2. Copy the packages from the netsim-sshkey example and compile them in the NSO Build container. The easiest way to do this is by using the docker exec command, which gives more control over what to build and the order of it. You can also do this with a script to make it easier and less verbose. Normally you populate the package directory from the host. Here, we use the packages from an example.

   Copy

   docker exec -it build-nso-pkgs sh -c 'cp -r ${NCS_DIR}/examples.ncs/development-guide \
       /nano-services/netsim-sshkey/packages ${NCS_RUN_DIR}'
   
   docker exec -it build-nso-pkgs sh -c 'for f in ${NCS_RUN_DIR}/packages/*/src; \
       do make -C "$f" all || exit 1; done'

3. Start the netsim container. This outputs the generated init.xml and ncs.conf files to the NSO Production container. The --wait flag instructs to wait until the health check returns healthy.

   Copy

   docker compose --profile example up --wait

4. Start the NSO Production container.

   Copy

   docker compose --profile prod up --wait

   At this point, NSO is ready to run the service example to configure the netsim device(s). A bash script (demo.sh) that runs the above steps and showcases the netsim-sshkey example is given below:

   Copy

   #!/bin/bash
   set -eu # Abort the script if a command returns with a non-zero exit code or if
           # a variable name is dereferenced when the variable hasn't been set
   GREEN='\033[0;32m'
   PURPLE='\033[0;35m'
   NC='\033[0m' # No Color
   
   printf "${GREEN}##### Reset the container setup\n${NC}";
   docker compose --profile build down
   docker compose --profile example down -v
   docker compose --profile prod down -v
   rm -rf ./packages/NSO-1/* ./log/NSO-1/*
   
   printf "${GREEN}##### Start the build container used for building the NSO NED
       and service packages\n${NC}"
   docker compose --profile build up -d
   
   printf "${GREEN}##### Get the packages\n${NC}"
   printf "${PURPLE}##### NOTE: Normally you populate the package directory from the host.
   Here, we use packages from an NSO example\n${NC}"
   docker exec -it build-nso-pkgs sh -c 'cp -r
    ${NCS_DIR}/examples.ncs/development-guide/nano-services/netsim-sshkey/packages ${NCS_RUN_DIR}'
   
   printf "${GREEN}##### Build the packages\n${NC}"
   docker exec -it build-nso-pkgs sh -c 'for f in ${NCS_RUN_DIR}/packages/*/src;
       do make -C "$f" all || exit 1; done'
   
   printf "${GREEN}##### Start the simulated device container and setup the example\n${NC}"
   docker compose --profile example up --wait
   
   printf "${GREEN}##### Start the NSO prod container\n${NC}"
   docker compose --profile prod up --wait
   
   printf "${GREEN}##### Showcase the netsim-sshkey example from NSO on the prod container\n${NC}"
   if [[ $# -eq 0 ]] ; then # Ask for input only if no argument was passed to this script
       printf "${PURPLE}##### Press any key to continue or ctrl-c to exit\n${NC}"
       read -n 1 -s -r
   fi
   docker exec -it nso1 sh -c 'sed -i.orig -e "s/make/#make/"
    ${NCS_DIR}/examples.ncs/development-guide/nano-services/netsim-sshkey/showcase.sh'
   docker exec -it nso1 sh -c 'cd ${NCS_RUN_DIR};
    ${NCS_DIR}/examples.ncs/development-guide/nano-services/netsim-sshkey/showcase.sh 1'

Upgrading NSO using Docker Compose

This example describes how to upgrade NSO when using Docker Compose.

Upgrade to a New Minor or Major Version

To upgrade to a new minor or major version, for example, from 6.0 to 6.1, follow the steps below:

1. Change the image version in the Compose file to the new version, i.e., 6.1.

2. Run the docker compose up --profile build -d command to start up the Build container with the new image.

3. Compile the packages using the Build container.

   Copy

   docker exec -it build-nso-pkgs sh -c 'for f in
   ${NCS_RUN_DIR}/packages/*/src;do make -C "$f" all || exit 1; done'

4. Run the docker compose up --profile prod --wait command to start the Production container with the new packages that were just compiled.

Upgrade to a New Maintenance Version

To upgrade to a new maintenance release version, for example, to 6.1.1, follow the steps below:

1. Change the image version in the Compose file to the new version, i.e., 6.1.1.

2. Run the docker compose up --profile prod --wait command.

   Upgrading in this way does not require a recompile. Docker detects changes and upgrades the image in the container to the new version.